LEICA CAMERA SERIAL NUMBER LOOKUP

65 units of M3 prototypes were being produced. The author had suggested there were approx. Year: 1955 Serial Number:- 700000 There are also quite a few other illustrative photos of early, rare versions of Leica M3 bodies appeared in page 172 onwards on a good reference book, An Illustrated History of Leica Camera Vol.

However, it was not until 1924 that Leitz decided to go ahead with the concept and production began the following year. The concept was conceived by their employee Oskar Barnack in 1913 at which time two prototypes were built. Leica made lens number 1,000,000, a 50mm f/1.5 Summarit, on 24 October 1952, at which time they already had onver 100 years of experiance.The Leica Standard, Model E was the fourth version of the original 35 mm Leica camera to be launched from Ernst Leitz in Wetzlar, Germany. Serial numbers as low as 50,000 are still floating around.

This feature was first seen on late Leica I model C cameras in 1931, and all Leica II, Model D from 1932, identified by a '0' (zero) stamped on the lens mount flange at the top, to indicate the implementation of the standard, a practice that was continued for some time. All these models use the standardised lens mount with distance from film plane to lens flange fixed to 28.8 mm, a Leitz standard. The Leica III with lower shutter speeds was introduced in 1933 this model would later have the faster speed of 1/1000 sec with the IIIa of 1935, though the Leica III would continue in parallel production for several years. The camera began production in the same year as the Leica II with a coupled rangefinder. The Leica Standard was introduced as a basic model by Ernst Leitz, Wetzlar in October 1932. The main feature of the Leica IIIa is the shutter speed range from T (shutter remains open), 1 second, 1/2, 1/4, 1/8 and 1/20 on the front dial 1/40, 1/60, 1/100, 1/200, 1/500, 1/1000 and Z (shutter remains open while release button is depressed.

Leica Camera Serial Number Lookup

Model Serial number LEICA / M9-P BLACK PAINT 4342294 LEICA 50mm f/2.8 ELMAR-M Lens 3732374 LEICA 90 f/4 ELMAR-C.Welcome to the Leica serial number lookup & search tool. Variants Click any item to leave an anonymous tip. The original lens for the Leica Standard when introduced was the Leitz Elmar 1:3.5 F=50mm in a collapsible nickel-plated focusing mount with infinity catch. On the back of these models there is a hole covered by a black plug, presumably for back focus calibration.

By this time, production of chrome-finished Standard cameras had started in small numbers. These cameras were made between October 1932 and early 1934. The serial numbering began at 101.001 and continued consecutively to 106.000. The accessory shoe on the top plate sits exactly above the lens mount for fitting either a rangefinder or an accessory viewfinder. The only improvement over its predecessor, the Leica I model C, was the smaller-diameter extendible rewind knob. Put your serial number below and select if you want to search a camera or lens and click search and it will give you the available information.The Leica Standard was at first made only in black enamel finish, with nickel-plated lens barrel and camera controls.

Mm and the body LEICA Ernst Leitz Wetzlar Germany, and bears serial number 114052, which we believe to be the serial number of an early prototype camera.The Standard in its basic version is not a rangefinder camera. A disc covers the spot occupied by the slow speed dial found on the other Leica models. Those made after 1945 share body casting with the contemporary models prepared for slow speeds. The Standard camera was replaced in 1949 by the viewfinder-less Leica Ic as the basic camera in the Leica line. Not many were made each year after 1940, except that 461 cameras were made in 1947.

Standard cameras imported from Germany later were also sold with Wollensak lenses. Some Standard cameras were assembled at Leitz New York during the 1940s from spare parts using Leica III body shells and equipped them with Wollensak lenses. The measured subject distance using the rangefinder must be set on the lens' distance scale manually.